| |
Buffing Wheel |
|
|
|
This Buffing wheel is used on Homag
edgebanders among other machines.
|
|
| |
Pressure beam foam |
|
|
|
This is a high quality Foam used on the
pressure beam of panel saws. This foam is just like the foam
found on the underside of Holzma pressure beams. This
pressure beam foam is sold by the roll. To purchase in 10
foot increments see part number 32191010.
|
|
| |
Safety Flap |
|
|
|
This safety flap is designed to fit a
wide variety of Holzma panel saws. Any Holzma that has the
flap where the top is a semi circle, can use this safety
flap. The flap is made to the longest length needed. There
are 2 fracture lines in the bottom of the flap that
corresponds to the other 2 flap lengths that are needed.
Simply snap the flap along the desired fracture line to get
the flap of the correct length.
|
|
| |
Nested pod 126 x 126 |
|
|
|
This vacuum pod is a pod that is
designed to go on flat router tables or with the correct
groove matrix, it can fit inside the grooves. The pod is
126mm long x 126mm wide x 55mm high. A high quality foam
rubber is used in the pod to provide the vacuum seal. The
ability to use this pod by itself or chained together with
other pods, makes this pod unique. Using a 6mm airline this
pod can be setup to have several of them using a single
source of vacuum. This helps minimize the setup time while
placing the vacuum pods on the table. This pod is easily
adaptable to almost any flat table router on the market
today.
|
|
| |
Nested pod 34 x 132 |
|
|
|
This vacuum pod is 34 mm x 132 mm x
50mm tall. This pod can be used along side our pod 13351000.
|
|
| |
Track Pad 30 x 78 |
|
|
|
This track pad fits most Brandt edge
banding machines. The pad is 30mm x 78mm and snaps onto the
drive chain.
|
|
| |
Track Pad 61 x 79 |
|
|
|
This track pad fits most Homag edge
banding machines and also fits some Brandt edgebanding
machines. The pad is 61mm x 79mm and snaps onto the drive
chain
|
|
| |
Pod bottom 140 x 115 |
|
|
|
This rubber pod cover is made to fit
several of the OEM vacuum pods that come new with various
machine brands. This cover was designed with 2 seals for
better sealing. This cover is a direct replacement for the
ones supplied by the OEM. Dimensions are 140mm x 115mm.
|
|
| |
Pod cover 117 x 117 |
|
|
|
This rubber pod cover is made to fit
several of the OEM vacuum pods that come new with various
machine brands. This cover has the single seal for sealing
off the vacuum. This cover is a direct replacement for the
ones supplied by the OEM. Dimensions are 117mm x 117mm.
|
|
| |
Pod cover 140 x 115 |
|
|
|
This rubber pod cover is made to fit
several of the OEM vacuum pods that come new with various
machine brands. This cover was designed with 2 seals for
better sealing. This cover is a direct replacement for the
ones supplied by the OEM. Dimensions are 140mm x 115mm.
|
|
Price: $15.00
Model Number: 24101000 |
|
|
|
|
1 -
2 -
3 -
4 -
>>NEXT>> |
