| |
Arrow Sticker |
|
|
|
This sticker is attached to the side of
the pod top and is used in conjunction with the degree
sticker to specify the angle of the vacuum pod top.
|
|
| |
Bottom Gasket |
|
|
|
This gasket is made from a very high
quality foam rubber. It is used on the bottom of the vacuum
pod.
|
|
| |
Degree Sticker |
|
|
|
This sticker is wrapped around the body
of the vacuum pod.
|
|
| |
Filter Screen |
|
|
|
This filter is used in the pod top and
bottom. It is 15.05mm in diameter and can also be used in
many of the aluminum rails on the table.
|
|
| |
Filter Screen |
|
|
|
|
This filter is used in the pod top and
bottom. It is 14.5mm in diameter and can also be used in
some of the aluminum rails on the table. The most common
filter for the aluminum rails is 15.05mm, but some of them
are 14.5mm.
|
|
| |
Half Top Gasket |
|
|
|
This gasket is used on the vacuum pod
top. This gasket uses half the area of the vacuum pod to
allow the running of smaller parts. This gasket is made from
a very high quality foam rubber and is in a closed loop for
maximum hold down of part.
|
|
| |
Metal Bar |
|
|
|
This metal bar is used on the bottom of
the vacuum pod and is 119mm long.
|
|
| |
Metal Bar |
|
|
|
This metal bar is used on the bottom of
the vacuum pod and is 65mm long.
|
|
| |
Metal Bar |
|
|
|
This metal bar is used on the bottom of
the vacuum pod and is 40mm long.
|
|
| |
O-ring |
|
|
|
This is the Oring between the Vacuum
port and the Pod top. 18.5 mm in diameter.
|
|
| |
O-ring |
|
|
|
this is the Oring that goes around the
diameter of the vacuum port. This O-ring is 95mm in
diameter.
|
|
| |
O-ring |
|
|
|
This O-ring is used between the pod
bottom and the pod body. This O-ring is 100mm in diameter.
|
|
| |
Pod Body |
|
|
|
ACI Matrix Pod
Body
|
|
